Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a big renewal across the country, Mild Giant wishes to make sure that these classic, stunning makers stay damage-free while being transported. Oh, and we desire the individuals moving them to be safe, too.

In the beginning glance, pinball devices can appear daunting to move due to the fact that of their size, fragility, and weight. Luckily, our knowledgeable Giants have a few tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

Most of modern-day pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and use a locking system to keep the headbox upright. There might likewise be two bolts inside as added safety, in case the lock is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you have to remove the headbox rear access panel to access to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the key might have been lost. Rather typically, there is a screw keeping this panel in place.

Once inside, eliminate the bolts and disconnect the big adapters that have circuitry going down into the machine. You may want to identify these adapters to put them back in the ideal area, however they should be different sizes, making it challenging to plug back incorrectly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Solid State Pinballs

For early Solid State Pinballs, you will have to eliminate the back glass. There is a lock situated on the headbox in among 3 areas: the left-hand side at the top, right-hand side on top or on top of the headbox in the center.

When opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Open up the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.

Now that you are within, you can eliminate the bolts, and any plugs that have wires decreasing into the device. You might desire to identify these plugs to put them back in the ideal area. You might not have to get rid of the plugs, as the circuitry needs to be long enough to permit the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and eliminate the back glass by raising it up from the bottom, and after that pulling it out from the bottom.

Next, you will require to get rid of the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Machine legs are held in place by 8 bolts. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into.

However these threaded plates and captive nuts can be harmed, and using extra nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to match.
Filling the Pinball.

You are now prepared to transfer your pinball device. Before you load it, make certain you get rid of the pinballs so they do not bounce around during transport.

If you are moving the pinball utilizing a van or SUV, it may be easier to get rid of the legs simply prior to packing the machine. Grab a good friend to have and help one of you supporting the pinball, while the other removes the front legs.

Make sure you strap the pinball in, as you do not desire it moving if have a peek at these guys you need to stop all of a sudden!

For Electro-Mechanical pinball machines, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs simply prior to packing the machine. Grab a good friend to have and help one of you supporting the pinball, while the other removes the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *